API 527
API 527API 527

£816 ex. VAT

£979 inc. VAT

Delivery Estimate is less than 7 days

Enquire about this product

newAPI API 527

500 series compressor/limiter.
  • Description
  • Features

The API 527 takes it’s place alongside the family of API VCA based compressors, the 225L and the 2500 Stereo Bus Compressor. Anyone familiar with those units will immediately be at home with the 527. Features common to the line like “feed forward” (NEW) and “feed back” (OLD) gain reduction methods selectable on the front panel, provide a choice of “that old way”, or “the new way” of compression, for the highest level of flexibility in signal gain control. The “old way” or Feed-Back method is what most of the classic compressors used for the gain control circuit. The “new way” gain reduction is more typical of the newer VCA type compressors that rely on RMS detectors for the gain control voltage.

There is a “SOFT”/”HARD” switch for an “over-easy” type compression resulting in a very natural, uncompressed sound or a typical sharp knee type that lends itself to a much more severe limiting effect.

The Threshold control sets the initial operating parameter. The 527 can be operated wit…

The API 527 takes it’s place alongside the family of API VCA based compressors, the 225L and the 2500 Stereo Bus Compressor. Anyone familiar with those units will immediately be at home with the 527. Features common to the line like “feed forward” (NEW) and “feed back” (OLD) gain reduction methods selectable on the front panel, provide a choice of “that old way”, or “the new way” of compression, for the highest level of flexibility in signal gain control. The “old way” or Feed-Back method is what most of the classic compressors used for the gain control circuit. The “new way” gain reduction is more typical of the newer VCA type compressors that rely on RMS detectors for the gain control voltage.

There is a “SOFT”/”HARD” switch for an “over-easy” type compression resulting in a very natural, uncompressed sound or a typical sharp knee type that lends itself to a much more severe limiting effect.

The Threshold control sets the initial operating parameter. The 527 can be operated with signal input levels from +10 dBu to -20 dBu.

The 527 features an Output fader control that ranges from minus infinity to +10dB, and output capability is +28 dBu through our 2520 discrete amplifier and a large API output transformer. The output level remains fairly constant regardless of the threshold or ratio control, much like the “more/less” Ceiling control on the API 525 compressor. This allows for live adjustments without any noticeable gain changes in the program level.

The patented THRUST function can be switched in and out via the front panel as well, applying a high pass filter before the RMS detector circuit that preserves that punchy bottom end.

Show More
Gear Status

New Gear

Brand

API

Input Impedance

High Level In 160K ohms Low Level In 80K ohms

Output Load Impedance

High Level Out 85 ohms Low Level Out 50 ohms

Frequency Response

+/- 1dB 20Hz – 20kHz

Dimensions

1.5″ X 5.25″ X 7.5″ Deep

Weight

1.75 lbs.

Share this product

£816 ex. VAT

£979 inc. VAT

Delivery Estimate is less than 7 days

Enquire about this product

Share this product