VT-3-temp_1024x1024
VT-3-temp_1024x1024

£1,958 ex. VAT

£2,349 inc. VAT

Delivery Estimate is less than 7 days

Enquire about this product

newD W Fearn D W Fearn VT3

A dual-channel, all-triode vacuum tube DI with independent channels.
  • Description
  • Features

The D W Fearn VT3 is an all triode valve DI box with two channels designed for recording instruments. The load impedance on the inputs of the D W Fearn VT2 is designed specifically to accommodate all instruments that use a 1/4″ jack out. Valve circuits provide the necessary high impedance for recording every facet of the sound of instruments that plug into the unit.

Designed to go into a microphone preamp, the outputs on the D W Fearn VT3 are at microphone level. The VT3 and a high quality mic pre such as a Neve 1073 (also available from Miloco Gear) is the perfect marriage for any instruments that can be recorded through DI.

D W Fearn have kept things easy on the VT3. You simply plug your instrument into the front panel jack socket and plug into the XLR output either on the front, or using the parallel XLR on the back, depending on the arrangement of your racks. Also included is jack output that can be used to plug into a guitar amp if necessary. Also included is a HP filter, an…

The D W Fearn VT3 is an all triode valve DI box with two channels designed for recording instruments. The load impedance on the inputs of the D W Fearn VT2 is designed specifically to accommodate all instruments that use a 1/4″ jack out. Valve circuits provide the necessary high impedance for recording every facet of the sound of instruments that plug into the unit.

Designed to go into a microphone preamp, the outputs on the D W Fearn VT3 are at microphone level. The VT3 and a high quality mic pre such as a Neve 1073 (also available from Miloco Gear) is the perfect marriage for any instruments that can be recorded through DI.

D W Fearn have kept things easy on the VT3. You simply plug your instrument into the front panel jack socket and plug into the XLR output either on the front, or using the parallel XLR on the back, depending on the arrangement of your racks. Also included is jack output that can be used to plug into a guitar amp if necessary. Also included is a HP filter, and the typical ground lift selector as is found on most DI boxes.

Both channels are completely independent, allowing the user to use two separate sources together. The usual D W Fearn build quality applies to the DI too, so when it comes to valve-based DI boxes it really is hard to beat the D W Fearn VT3 for quality in all aspects of the design and sound.

Show More
Gear Status

New Gear

Brand

D W Fearn

Share this product

£1,958 ex. VAT

£2,349 inc. VAT

Delivery Estimate is less than 7 days

Enquire about this product

Share this product