PM1A
PM1Aside

£1,130 ex. VAT

£1,356 inc. VAT

Delivery Estimate is less than 7 days

Enquire about this product

newTube Tech Tube-Tech PM 1A

The PM 1A is a combined mic preamp/DI, part of the Tube-Tech Modular series which delivers deliver exactly the same uncompromized sound quality as our 19” units.
  • Description
  • Features

The PM 1A is a combined mic preamp/DI, part of the Tube-Tech Modular series which delivers deliver exactly the same uncompromized sound quality as our 19” units. This PM 1A features higher fidelity and a few new features: An impedance switch to match the input perfectly to all types of microphones, an overload indicator and 2 dB gain steps.

The PM 1A DI continues the TUBE-TECH tradition of extremely good sounding DI’s, delivering world class sound for bass and guitar DI recordings.

Features
• All-tube design featuring push-pull output amplifier
• Frequency response @ -3 dB: 5 Hz to 60 kHz
• Typical noise: 5 dB @ 200Ω
• CMRR: > 60 dB @ 10 kHz
• Gain: +10 dB to +70 dB in 2 dB steps – DI gain: 0-60 dB
• Selectable mic input impedance: 600 Ω/1.2 kΩ/2.4 kΩ
• Selectable pad in front of input transformer (-20 dB)
• Selectable +48 V phantom power
• Low cut filter (20 Hz/40 Hz/Off)
• Phase reverse
• Overload indicator
• Gold plated switche…

The PM 1A is a combined mic preamp/DI, part of the Tube-Tech Modular series which delivers deliver exactly the same uncompromized sound quality as our 19” units. This PM 1A features higher fidelity and a few new features: An impedance switch to match the input perfectly to all types of microphones, an overload indicator and 2 dB gain steps.

The PM 1A DI continues the TUBE-TECH tradition of extremely good sounding DI’s, delivering world class sound for bass and guitar DI recordings.

Features
• All-tube design featuring push-pull output amplifier
• Frequency response @ -3 dB: 5 Hz to 60 kHz
• Typical noise: 5 dB @ 200Ω
• CMRR: > 60 dB @ 10 kHz
• Gain: +10 dB to +70 dB in 2 dB steps – DI gain: 0-60 dB
• Selectable mic input impedance: 600 Ω/1.2 kΩ/2.4 kΩ
• Selectable pad in front of input transformer (-20 dB)
• Selectable +48 V phantom power
• Low cut filter (20 Hz/40 Hz/Off)
• Phase reverse
• Overload indicator
• Gold plated switches
• DI Jack input for a variety of instruments
• DI input impedance > 1 MΩ
• MU-metal shielded input transformer
• In- and output are transformer balanced and fully floating

Show More
Gear Status

New Gear

Brand

Tube Tech

Share this product

£1,130 ex. VAT

£1,356 inc. VAT

Delivery Estimate is less than 7 days

Enquire about this product

Share this product